AI Technology COOL-BOND PSA-3NC Thermal Adhesive Tape Pad Interface TIM

Description

The Ultimate Thermal Compound for Cooling RAM
Two (2) 1.5 x 4.5 Inch Thermal Adhesive Tape
No measuring, no guesswork, just performance!
COOL-BOND
™
PSA-3NC
Non Curing Thermal
Adhesive Tape
COOL-BOND™ PSA-3NC is a novel non curing pressure sensitive thermal adhesive tape. It utilizes super fine alumina crystallite filled pressure sensitive interface film that provides instant bonding and thermal transfer. It is designed for thermal transfer of memory, power devices, and modules to heat sinks. Instant bond strength of over 30 psi is achieved upon pressing the parts together with less than 10 psi.
COOL-BOND™ has high thermal conductivity, and the low Tg adhesive imposes minimum thermal stress on bonded parts during thermal cycling or shock testing.
COOL-BOND™ is thermally conductive yet electrically insulating. With COOL-BOND™, there is never a concern of shorting electrical components. COOL-BOND™ PSA-3NC is non curing, allowing for the easy removal of the heat sink for testing or upgrades.
Application Instructions
(1) Keep at room temperature for 15 minutes before using.
(2) Cut to desired size.
(3) Clean contact surfaces if needed.
(4) Remove one side of the release liner by peeling up a corner of the release liner. Fold the release liner over, approaching a 180º angle.
(5) Pull the release liner quickly, removing it with one stroke. Apply to substrate, then remove other side of release liner and attach parts with 10 psi or finger pressure for most components with less than 1 square inch bonding area.
(6) Mechanical fastener is recommended but not required in most cases. Avoid skin contact whenever possible. Wash hands after usage.
COOL-BOND™ PSA-3NC measures 1.5 x 4.5 inches and can be cut before application to accommodate all RAM sizes. Unlike adhesive thermal pastes, COOL-BOND™ does not require measuring, mixing, or smoothing. There is no guesswork with COOL-BOND™, just performance!
Terms and Conditions
We only accept PayPal, and we only ship to the United States.
We ship daily Monday through Friday excluding Holidays. Orders will be shipped the following business day.
Under no circumstance shall AI Technology be liable for accidental, consequential, or other damages arising from the use or handling of this product.
<
AI Technology, Inc.
AI Technology has more than 25 years of experience and success helping military, aerospace, computer, and super-computer manufacturers use thermal interface materials to build some of the most reliable electronic devices and computers. AIT is now reaching out to serve the consumer PC community with its COOL-BOND™ state-of-the-art thermal adhesive products.