AI Technology COOL-GELFILM SZ Heatsink Thermal Interface Compound Film Pad TIM

Description

The Ultimate Heatsink Thermal Compound
Three (3) 1.5 x 1.5 Inch Square Pads
No measuring, no guesswork, just performance!
Product Description
COOL-GELFILM™ SZ is a new class of thermal interface material that dispenses like a film but delivers performance characteristics similar to a thermal grease or gel. COOL-GELFILM™ SZ is a modified zinc oxide admixture, crystallite filled, electrically insulating at normal voltage, and engineered for large area and gap filling interface applications. It is designed to have high compressibility and instant flow to enhance thermal transfer from power device to heat sinks. COOL-GELFILM™ SZ is slightly tacky on both sides for optimum instant thermal transfer performance.
Application Instructions
COOL-GELFILM™ SZ sticks slightly to metal surfaces on both sides for ease of application. It does not adhere to the release liners that are on both sides when packaged. To apply, peal off the bottom release liner (no tab) and apply the exposed pad to the CPU. Then smooth out the pad on the CPU by gently touching the top release liner with your finger to remove any air bubbles. Finally, remove the top release liner by pulling on the white tab. Then install the CPU cooler. You can also trim the pad before installing using sharp scissors on any edge, except for the white tab edge, for a perfect fit.
COOL-GELFILM™ SZ is 1.5 x 1.5 inches (38 x 38 mm) square to accommodate all processor sizes and is 3 thousandths of an inch (0.003 inch or 3 mils) (0.0762 mm) thick. Unlike thermal paste and grease, COOL-GELFILM™ SZ does not require measuring or smoothing. There is no guesswork with COOL-GELFILM™ SZ, just performance!
Terms and Conditions
We only accept PayPal, and we only ship to the United States.
We ship daily Monday through Friday excluding Holidays. Orders will be shipped the following business day.
Under no circumstance shall AI Technology be liable for accidental, consequential, or other damages arising from the use or handling of this product.
Company Profile
AI Technology has more than 25 years of experience and success helping military, aerospace, computer, and super-computer manufacturers use thermal interface materials to build some of the most reliable electronic devices and computers. AIT is now reaching out to serve the consumer PC community with its COOL-GELFILM™ state-of-the-art thermal products.