Thermal Grizzly Kryonaut High Performance Thermal Greace Compound Paste - 5.5g

Description

Description:
Thermal Grizzly
Kryonaut
is a high performance thermal grease.
Kryonaut
thermal grease was created especially for the extremely demanding applications and the highest expectations of the overclocking community.
Kryonaut
is also highly recommended as a top product for critical cooling systems in the industrial environment.
designed for Overclocking
excellent thermal conductivity
no curing
long-term durability
no electrical conductivity!!!
applicable with aluminum (warning is for Conductonaut only!)
Properties:
Thermal Grizzly
Kryonaut
is an extremely high performance thermal grease, which shows its true capabilities in cryogenic environments.
Kryonaut
thermal grease sports high long time stability, all without curing.
Application:
Thermal Grizzly
Kryonaut
is best used with applications in need of high temperature resistance, for example those in electrical or computer engineering. Of course, Thermal Grizzly
Kryonaut
can also be used in a wide variety of other lines of industries. Thermal Grizzly
Kryonaut
is best applied with the Thermal Grizzly applicator, but it can also be applied by way of brush, spatula, silkscreen or pad printing.
Storage:
Thermal Grizzly
Kryonaut
should be stored in its original packaging, in a dry environment at room temperature.
Application
Rating
Thermal Conductivity
*****
Sub-Zero Overclocking
*****
Overclocking
*****
Water Cooling
*****
Air Cooling
*****
Silicone Sensitive Areas
—
„Kryo" - the greek word for "cold" - also found in the german word for "cryoengineering", suggests that this thermal grease was created especially for cryogenic applications - for the true "Kryonauts" amongst the "extreme overclockers".
Kryonaut
uses a special structure, which halts the drying out process at temperatures of up to 80° Celsius. This structure is also responsible for the nano-aluminum- and zinc-oxide-parts included in the grease to compound optimally, to compensate for unevenness of the component (i.e. the CPU) or the heat sink, thus guaranteeing remarkable heat transfer.
*following DIN 51412-1
All of these data were determined and confirmed with the technical facilities of http://overclocking.guide.
Trademark Information:
Thermal Grizzly is a registered trademark.
Please note:
The data in this technical data sheet are based on our current knowledge and experience. Due to the large amount of possible factors, this should not be construed as to release the users from doing their own tests and screening. No legally binding assurance of specific properties or applicability for a concrete purpose should be derived from these data. Please consider contacting us for further detail
It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing lawsand legislation are observed.
Quick Start Guide
Applying THERMAL GRIZZLY Thermal Grease
Important:
Avoid eye and skin contact! Keep away from children! Contact a doctor immediately if swallowed or after eye contact!
1. Clean the contact surface
Clean the surface of the CPU heat spreader and CPU cooler with a dry cloth or high-percentage isopropanol.
2. Apply the thermal grease
2.1. Apply using the Thermal Grizzly applicator
Mount the applicator to the syringe (Figure 1). Now the grease can be applied as seen in Figure 2. The applied layer should be as thin as possible, but yet cover the entire surface of the CPU heat spreader.
After the application pull back the plunger slightly, so that the thermal grease returns from the applicator back into the syringe. The applicator may now be unscrewed and the cap can be screwed. Note: If you purchased the syringe in a zip bag, you can safely store the syringe and applicator in the bag until needed for next application.
2.2. Apply with a spatula or plastic card (optional)
Use a plastic spatula or a plastic card with a straight edge (no metal objects!) Apply an approximately 3 x 3 mm drops and spread it evenly.
Note: Apply the thermal grease very slowly and with a little pressure.
Phone Links UK
Thermal Grizzly Kryonaut High Performance Thermal Greace Compound Paste - 5.5g
Apple
Samsung
Nokia
Sony
HTC
Huawei
LG
Blackberry
OnePlus
Lenovo
Motorola
Acer
Microsoft
Tools & Gadgets
Nintendo
Xiaomi
Google
Asus
HP
Description:
Thermal Grizzly
Kryonaut
is a high performance thermal grease.
Kryonaut
thermal grease was created especially for the extremely demanding applications and the highest expectations of the overclocking community.
Kryonaut
is also highly recommended as a top product for critical cooling systems in the industrial environment.
designed for Overclocking
excellent thermal conductivity
no curing
long-term durability
no electrical conductivity!!!
applicable with aluminum (warning is for Conductonaut only!)
Properties:
Thermal Grizzly
Kryonaut
is an extremely high performance thermal grease, which shows its true capabilities in cryogenic environments.
Kryonaut
thermal grease sports high long time stability, all without curing.
Application:
Thermal Grizzly
Kryonaut
is best used with applications in need of high temperature resistance, for example those in electrical or computer engineering. Of course, Thermal Grizzly
Kryonaut
can also be used in a wide variety of other lines of industries. Thermal Grizzly
Kryonaut
is best applied with the Thermal Grizzly applicator, but it can also be applied by way of brush, spatula, silkscreen or pad printing.
Storage:
Thermal Grizzly
Kryonaut
should be stored in its original packaging, in a dry environment at room temperature.
Application
Rating
Thermal Conductivity
*****
Sub-Zero Overclocking
*****
Overclocking
*****
Water Cooling
*****
Air Cooling
*****
Silicone Sensitive Areas
—
„Kryo" - the greek word for "cold" - also found in the german word for "cryoengineering", suggests that this thermal grease was created especially for cryogenic applications - for the true "Kryonauts" amongst the "extreme overclockers".
Kryonaut
uses a special structure, which halts the drying out process at temperatures of up to 80° Celsius. This structure is also responsible for the nano-aluminum- and zinc-oxide-parts included in the grease to compound optimally, to compensate for unevenness of the component (i.e. the CPU) or the heat sink, thus guaranteeing remarkable heat transfer.
*following DIN 51412-1
All of these data were determined and confirmed with the technical facilities of http://overclocking.guide.
Trademark Information:
Thermal Grizzly is a registered trademark.
Please note:
The data in this technical data sheet are based on our current knowledge and experience. Due to the large amount of possible factors, this should not be construed as to release the users from doing their own tests and screening. No legally binding assurance of specific properties or applicability for a concrete purpose should be derived from these data. Please consider contacting us for further detail
It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing lawsand legislation are observed.
Quick Start Guide
Applying THERMAL GRIZZLY Thermal Grease
Important:
Avoid eye and skin contact! Keep away from children! Contact a doctor immediately if swallowed or after eye contact!
1. Clean the contact surface
Clean the surface of the CPU heat spreader and CPU cooler with a dry cloth or high-percentage isopropanol.
2. Apply the thermal grease
2.1. Apply using the Thermal Grizzly applicator
Mount the applicator to the syringe (Figure 1). Now the grease can be applied as seen in Figure 2. The applied layer should be as thin as possible, but yet cover the entire surface of the CPU heat spreader.
After the application pull back the plunger slightly, so that the thermal grease returns from the applicator back into the syringe. The applicator may now be unscrewed and the cap can be screwed. Note: If you purchased the syringe in a zip bag, you can safely store the syringe and applicator in the bag until needed for next application.
2.2. Apply with a spatula or plastic card (optional)
Use a plastic spatula or a plastic card with a straight edge (no metal objects!) Apply an approximately 3 x 3 mm drops and spread it evenly.
Note: Apply the thermal grease very slowly and with a little pressure.
We only accept payment by verified PayPal accounts with a confirmed address. Please note that when you pay by an eCheque through PayPal it can take up to 5-7 working days for it to clear, which will delay the dispatch process.
All items will be dispatched within 24 hours after receiving your payment. Kindly note that items purchased on weekends and Bank Holidays will be dispatched the next working day.
UK Delivery
Following are the methods used for delivery, which will be mentioned in the listing.
First Class Recorded
You will have to sign for this to receive your package. It can take up to 1 to 3 working days, BUT NOT GUARANTEED. A tracking number will be provided if requested.
First Class
It can take up to 1 to 3 working days, BUT NOT GUARANTEED.
Ireland & Europe Royal Airmail
3-5 working days, BUT NOT GUARANTEED.
We will only send replacement items once it has been confirmed lost by Royal mail. This can take up to 14 working days for UK customers and up to 30 working days for International customers. We cannot be held responsible for delays caused by Royal mail, your local postal service or by International customs inspection.
"We want you to be 100% happy with your purchase and offer a 30 day "no quibble" guarantee"
Warranty & Returns
If you are not happy with the product, you can return it within 30 days as long as it is in it's original condition/packaging and unused. No questions asked.
Prior to returning any item. please get in touch with us so we can help you efficiently.
Buyers will be responsible for the return cost. We will only be able to return or replace items that we have actually received.
General Questions
If you have any general questions then please contact us via eBay message service only.
Please allow up to 24 hours for responses. You can also contact us via eBay message service for any wholesale enquiries. Please note that we are closed on Sundays.
Refund / replacement / return order enquires.
If you want to contact us for a product you have sent back to us to see whether we have received it or not, please go to the Royal Mail website to confirm whether the parcel has been delivered to our business center and then allow 48 hours after we receive it to contact you
Business Hours
Mon-Fri 10am to 5pm
Business Address
143 Westmoreland Road
Bromley, Kent
BR2 0TY (UK)
"
"
(
)
"
"
(
)
"
"
(
)
"
"
(
)
"
"
(
)
4.1
9504
3448
phonelinksuk
10-12-2018 11:39:22
10-12-2018 11:39:22